5-Star Rated Faucet & Sink Installation & Repair in Tampa, FL

Faucet installation in Tampa typically runs $279 to $500 depending on the fixture type and whether we need to modify supply lines. Sink installation ranges from $400 to $1,200, with undermount kitchen sinks on the higher end because of the countertop support work involved. Repairs start at $279 for cartridge replacements, valve rebuilds, and leak fixes. Tampa’s hard water means you may need cartridge work sooner than the national average, so factor that into your fixture budget.

A: Yes. For most faucet and sink calls placed before noon in Tampa, we can be on-site the same day. We service Seminole Heights, Tampa Heights, New Tampa and all of Hillsborough County regularly. Leaks under the cabinet can warp flooring and cause mold fast, especially in mixed (historic bungalows, concrete block, modern frame) homes, so those get priority. Call (813) 343-2212 for an honest arrival window.

A: Faucet and sink work in Tampa typically runs $279 to $850. Cartridge replacement or aerator cleaning: $279 to $325. Faucet replacement (labor only, customer-supplied fixture): $279 to $375. Sink supply line or P-trap fix: $279 to $425. Full sink replacement with new faucet: $450 to $850 installed. For mixed (historic bungalows, concrete block, modern frame) homes with clay and cast iron (older areas), PVC (north of I-275) supply lines, most jobs wrap in under 2 hours. We quote flat-rate before work begins.

A: A dripping faucet almost always means the cartridge, O-ring, or valve seat is worn out. In Tampa, standard water accelerates that wear. Florida water generally has moderate mineral content that builds up over time. Tightening usually makes it worse by damaging the seat. Our plumbers keep cartridges for Moen, Delta, Kohler, Pfister, and other major brands on the trucks, so most drip fixes are done same-day for $279 to $325.

A: Yes, we install fixtures you buy yourself. We recommend name brands (Moen, Delta, Kohler, Pfister) because of better warranties and easy parts availability. Our labor starts at $279 for a direct replacement. If your old supply lines or shut-off valves need work too (common in mixed (historic bungalows, concrete block, modern frame) homes from the 1920s to 2000s (mixed)), we quote that separately before starting.

A: We service every major brand including Moen, Delta, Kohler, Pfister, American Standard, Grohe, and Hansgrohe. In Tampa, we commonly find Moen and Delta in homes from the 1920s to 2000s (mixed). Our trucks carry cartridges and seals for these brands so most repairs are one-visit fixes. For rare or high-end fixtures, we source parts next business day.

A: Yes. We hold Florida plumbing license CFC1431159 and our plumbers are trained on Hillsborough County building codes. Faucet and sink work is covered under the license, including rough-in adjustments, supply line replacement, and drain hookup. Your manufacturer warranty stays valid when a licensed plumber does the install. You can verify our license on the Florida DBPR site.

A: Slow kitchen drains in Tampa are usually caused by grease buildup, food particles, or tree root intrusion into clay and cast iron (older areas), PVC (north of I-275) drain lines. high – mature live oaks and water oaks with aggressive root systems. In mixed (historic bungalows, concrete block, modern frame) homes, another common cause is a partially blocked P-trap or a clogged branch line. Most slow-drain fixes run $279 to $425 depending on where the clog is. We clear it and can camera-inspect to confirm the cause.

A: Yes. All faucet and sink repairs in Tampa come with a warranty on parts and labor. Manufacturer warranties on name-brand faucets range from limited lifetime (Moen, Delta) to 5 or 10 years. Our labor warranty covers the installation itself. For Tampa homeowners in Seminole Heights, Tampa Heights, New Tampa, if anything fails within the warranty period, we come back and fix it at no charge.

A: Yes, we provide free estimates for faucet and sink installation or repair in Tampa. We inspect the fixture, check supply lines and shut-off valves, and give you upfront flat-rate pricing before work begins. No hidden diagnostic fee when you approve the repair. Call (813) 343-2212 or book online from Seminole Heights, Tampa Heights, New Tampa or anywhere in Hillsborough County.

A: The new sink must fit the existing countertop cutout or you will need countertop modification. For drop-in sinks, the rim overhang covers variations of up to 1 inch in cutout size. For undermount sinks, the sink rim must match the cutout closely. We measure the existing cutout during the FREE diagnostic and recommend compatible sink dimensions. Most standard kitchen sink cutouts in Tampa homes accept a 33×22 or 30×18 inch sink depending on cabinet width.

A: Yes, faucet replacement without sink replacement is the most common service we perform. The faucet mounts through the existing sink holes using the same configuration (single hole, 3-hole, 4-inch spread, or 8-inch spread). We remove the old faucet, connect the new faucet with new supply lines, and test before leaving. Most kitchen faucet replacements take 1-2 hours.

A: Tampa hard water mineral deposits accumulate inside the drain pipe just below the pop-up stopper assembly and inside the P-trap, creating a sticky surface that catches hair and soap faster than normal. If snaking does not solve the problem for more than a few weeks, the P-trap or the drain body below may need cleaning or replacement. We also check whether the pop-up stopper mechanism is seating properly — a stopper that does not fully open reduces effective drain diameter and causes perceived slowness.

A: Labor to replace a standard bathroom faucet with a customer-supplied fixture typically runs $279-389 depending on the sink configuration and shutoff valve condition. If we source the faucet, add $80-250 depending on style and brand. The installation includes supply line replacement with new braided stainless lines, shutoff valve inspection, and a complete test at working pressure. The $279 minimum applies to approved repair work — diagnostic and estimate are FREE.

A: In-kind faucet and sink replacements (same location, same configuration) do not typically require a Hillsborough County plumbing permit. New sink installations that involve relocating drain lines or supply connections, or that are part of a larger permitted renovation, do require a permit. We assess permit requirements during the diagnostic and advise accordingly. All our work complies with Florida Plumbing Code standards whether or not a permit is required.