5-Star Rated Faucet & Sink Installation & Repair in University, FL

Faucet installation in the University area runs $279 to $500. Sink installations cost $400 to $1,200. Repairs start at $279 for cartridge replacements. Property managers with multiple units can discuss volume pricing by calling us directly at (813) 343-2212.

A: Yes. For most faucet and sink calls placed before noon in University, we can be on-site the same day. We service University Square, Terrace Park, Bruce B. Downs corridor and all of Hillsborough County regularly. Leaks under the cabinet can warp flooring and cause mold fast, especially in concrete block (older), frame townhomes (newer) homes, so those get priority. Call (813) 343-2212 for an honest arrival window.

A: Faucet and sink work in University typically runs $279 to $850. Cartridge replacement or aerator cleaning: $279 to $325. Faucet replacement (labor only, customer-supplied fixture): $279 to $375. Sink supply line or P-trap fix: $279 to $425. Full sink replacement with new faucet: $450 to $850 installed. For concrete block (older), frame townhomes (newer) homes with early PVC and galvanized steel (older), PVC (newer) supply lines, most jobs wrap in under 2 hours. We quote flat-rate before work begins.

A: A dripping faucet almost always means the cartridge, O-ring, or valve seat is worn out. In University, standard water accelerates that wear. Florida water generally has moderate mineral content that builds up over time. Tightening usually makes it worse by damaging the seat. Our plumbers keep cartridges for Moen, Delta, Kohler, Pfister, and other major brands on the trucks, so most drip fixes are done same-day for $279 to $325.

A: Yes, we install fixtures you buy yourself. We recommend name brands (Moen, Delta, Kohler, Pfister) because of better warranties and easy parts availability. Our labor starts at $279 for a direct replacement. If your old supply lines or shut-off valves need work too (common in concrete block (older), frame townhomes (newer) homes from the 1960s to 2010s), we quote that separately before starting.

A: We service every major brand including Moen, Delta, Kohler, Pfister, American Standard, Grohe, and Hansgrohe. In University, we commonly find Moen and Delta in homes from the 1960s to 2010s. Our trucks carry cartridges and seals for these brands so most repairs are one-visit fixes. For rare or high-end fixtures, we source parts next business day.

A: Yes. We hold Florida plumbing license CFC1431159 and our plumbers are trained on Hillsborough County building codes. Faucet and sink work is covered under the license, including rough-in adjustments, supply line replacement, and drain hookup. Your manufacturer warranty stays valid when a licensed plumber does the install. You can verify our license on the Florida DBPR site.

A: Slow kitchen drains in University are usually caused by grease buildup, food particles, or tree root intrusion into early PVC and galvanized steel (older), PVC (newer) drain lines. moderate – standard suburban. In concrete block (older), frame townhomes (newer) homes, another common cause is a partially blocked P-trap or a clogged branch line. Most slow-drain fixes run $279 to $425 depending on where the clog is. We clear it and can camera-inspect to confirm the cause.

A: Yes. All faucet and sink repairs in University come with a warranty on parts and labor. Manufacturer warranties on name-brand faucets range from limited lifetime (Moen, Delta) to 5 or 10 years. Our labor warranty covers the installation itself. For University homeowners in University Square, Terrace Park, Bruce B. Downs corridor, if anything fails within the warranty period, we come back and fix it at no charge.

A: Yes, we provide free estimates for faucet and sink installation or repair in University. We inspect the fixture, check supply lines and shut-off valves, and give you upfront flat-rate pricing before work begins. No hidden diagnostic fee when you approve the repair. Call (813) 343-2212 or book online from University Square, Terrace Park, Bruce B. Downs corridor or anywhere in Hillsborough County.

A: Most single-handle cartridge swaps take 45-90 minutes including shutting off the water, pulling the handle and cartridge, cleaning the valve seat, installing the new part, and testing. We carry common Moen 1225, Delta RP46074, and Kohler GP30413 cartridges on the truck most days.

A: Yes, but customer-supplied fixtures are not covered under our parts warranty. We warranty our labor regardless. Call us before you buy and we can confirm the fixture fits your sink deck holes and supply valve spacing.

A: No permit is needed for a like-for-like faucet or sink swap in existing rough-in locations. Permits are only required when we cut new supply or drain lines into the wall or slab. Most standard faucet and sink installs in University (USF Area) are permit-free.

A: Turn it by hand. If it is stiff, leaks from the packing nut when you turn it, or will not move at all, it needs replacement. Compression-style valves older than 15-20 years frequently fail in University (USF Area). We replace with quarter-turn ball valves.

A: We install Moen, Delta, and Kohler faucets. We recommend buying from a local plumbing supply house for the best warranty support. We do not install low-cost no-name brands because they lack OEM replacement parts and typically fail within 2-3 years.